 |
| AMIANTOFIX |
|
|
|
|
Consolidating, impregnating compound
AMIANTOFIX is a compound containing water dispersed polymers, additives, pigments and inorganic inert material. After setting, it is bacteria and weather resistant.
Range of use
AMIANTOFIX is used in asbestos removal or disposal, and to treat concrete manufacts, consolidating asbestos-cement cladding so that no fibre is released into the environment.
The product can also be used on flaky or degraded manufacts and is classified as a “TYPE D” encapsulating agent according to the Italian Health Ministry decree dated 20/08/1999 (Official Gazette. No. 249, 22/10/1999).
|
|
|
|
|
|
| AMIANTOPLAST |
|
 |
|
PACKAGING
5 - 20 and 1.300 kg |
|
|
|
|
Asbestos-cement encapsulating liquid membrane
AMIANTOPLAST is a water based emulsion containing polymers, modifiers, additives, pigments and inorganic inert material. After setting, it offers excellent weatherproofness and water resistance, as well as good permeability to water vapour.
AMIANTOPLAST is available in four standard colours: white, grey, red and green.
Range of use
AMIANTOPLAST is used for waterproof coatings, in particular encapsulating treatments to decontaminate and recover asbestos-cement manufacts.
AMIANTOPLAST is a product certified according to UNI 10686 regulations, in compliance with the Italian Health Ministry decree dated 20/08/1999 (Official Gazette. No.249, 22/10/1999), and suitable therefore to be used as a “TYPE A” encapsulating agent.
Advantages
- Excellent adhesion and easy application
- Low cost
|
|
|
|
|
|
| ELASTIC TOP |
|
 |
|
PACKAGING
5 - 12 and 25 kg |
|
|
|
|
UV resistant, elastic waterproof finish
ELASTIC TOP is an elastic mix of copolymers with a wide molecular weight range, dissolved in aliphatic and aromatic hydrocarbon solvents, plus additives, pigments and inorganic inert material.
After setting, the film offers excellent UV resistance, very good adhesion to different types of substrates and good flexibility in cold conditions, long lasting in time.
ELASTIC TOP is available in four standard colours: white, grey, red and green.
Range of use
ELASTIC TOP is used to produce a UV resistant elastic finish on:
- Reinforced waterproofing membranes
- Sprayed polyurethane foam
- Flexible substrates, even metal ones
Advantages
- Can be applied at temperatures below 0°C
- Offers excellent UV resistance
- Is long lasting in time
|
|
|
|
|
|
| U.V. LASTIK |
|
|
|
|
UV proof elastomeric coating
U.V. LASTIK is a water based system made up of an aqueous dispersion of elastic polymers, modifiers, additives, pigments and inorganic inert material.
After setting, the film shows excellent adhesion and UV resistance, good elasticity in cold conditions, impermeability and resistance to rain, snow and other trying weather conditions. The product is also suitable for low temperature coatings.
Range of use
U.V. LASTIK is used to produce UV resistant, waterproof coatings on a variety of flexible substrates.
U.V. LASTIK is ideal to protect thermal insulating structures made of sprayed polyurethane foam.
Advantages
- Excellent adhesion
- Excellent resistance to UV rays and weather agents
- Good elasticity, especially in cold conditions
- Pleasant look
|
|
|
|
|
