 |
| FARMACRETE - RQ MASSETTO |
|
|
|
|
Self-levelling epoxy flooring for food and pharmaceutical industry
FARMACRETE and RQ MASSETTO are complex flooring systems for food and pharmaceutical industry.
Both systems have an high mechanical and chemical resistance with extremely good looks, while the first offers a particularly smooth surface (quite suitable for disinfection procedures) and the second offers a no slip surface, according with current regulations, easy to clean and keep disinfected. The application method is the same for both systems.
FARMACRETE and RQ MASSETTO are suitable in food and drug industry in accordance with DM 21/03/1973. Official test report
Range of use
FARMACRETE can be used as a floor base and finish coating in the following sectors:
- pharmaceutical and parapharmaceutical industry, doctor’s surgeries and various industrial environments requiring a highly resistant, beautiful floor for interiors assigned to dry working operations;
- showrooms and exhibitions;
- offices.
RQ MASSETTO is used as a base and finishing layer for industrial type floors in the following sectors:
- meat, fruit and vegetables processing companies, slaughterhouses, dairies, fishmongers, bakers, patisserie shops, etc;
- kitchens and canteens in hospitals, restaurants and hotels;
- cold stores, etc.
Amount required
1,60 - 2,20 kg/m² depending on the thickness required and on the type of the substrate
|
|
|
|
|
|
| FLOOR L-TRA |
|
|
|
|
Two components clear embedding resin
It's a two components clear resin especially formulated to obtain an high transparency even with 2 cm thickness and more.
Range of use
FLOOR L-TRA is used as:
* a special resin to embed objects of different kind and nature, visible through it;
* a clear protective coating on floors (and furniture).
How to use
Pour onto the surface to be coated no less than 2 kg/m² and spread (when necessary) with a 3 mm toothed spatula.
To obtain a final thickness greater than 5 mm, pour successive layers (less than 5 mm thick each) at 12(18 hour interval.
Yield
For a 1,00 mm thick coating you will need to apply about 1,05 kg/m² product.
|
|
|
|
|
|
| LEVEL CRETE® |
|
 |
|
PACKAGING
25 kg bags on 56 bag pallets |
|
|
|
|
Self-levelling resinous coloured cement
LEVEL CRETE is a coloured or neutral powder premix which with the addition of water becomes a self-levelling mixture tailored for the creation of floorings with the features and rendition similar to concrete.
It can be supplied already coloured or in the NEUTRO BIANCO (neutral white) or NEUTRO GRIGIO (neutral grey) versions to be coloured with a concentrated liquid paste at the moment of application.
Range of use
LEVEL CRETE can be used internally for the covering or finishing of floors in private houses, private or public offices, shops or showrooms, schools and classrooms, hospitals etc.
Using a dusting of it as a finisher, hardened with quartz and levelled with a mechanical spreader. LEVEL CRETE can be used in the industrial sector.
Classification of fire resistance
Class 0 (equivalent to a concrete structure).
|
|
|
|
|
|
| MALTA RAPIDA |
|
 |
|
PACKAGING
kg 20 A + B + C |
|
|
|
|
Fast hardening, self levelling epoxy mortar
Description
MALTA RAPIDA is a three component product made up of:
* component A: a mix of liquid epoxy prepolymers;
* component B: copolymerization amine;
* component C: special inert material and filler.
After application and hardening, the product provides a good base, especially suitable for further coatings with finishing resins.
The main feature of MALTA RAPIDA is its capacity to spread evenly even when applied to uneven surfaces; being self levelling, it is very easy to lay. Offers excellent adhesion to any underlying surface and a very high compression resistance.
MALTA RAPIDA is designed to harden in about 5 hours, thus making any flooring job quicker as it allows for up to two working cycles a day.
Warning
According to room temperature, the product must be kept cool in summer, to prevent an increase in the system reaction time with temperature, and warm in winter, as in the cold weather resins tend to crystallize and become less fluid.
Range of use
MALTA RAPIDA is used as self levelling base for floor laying jobs with SOLID CRETE or NORPHEN LEVEL
Yield
For a 2.5 mm coating you will need c. 4 kg/m²
|
|
|
|
|
|
| NATURAL |
|
 |
|
PACKAGING
30 kg A + B + C |
|
|
|
|
Mono or polycromatic resin coating
NATURAL is a three components coating system made up of two layers of different materials, an elastomeric one and a rigid one.
The two layers in combination produce very hard and rigid surfaces, capable to withstand microfissures on the underlying support.
Range of use
NATURAL is a resin coating for use on both floors and walls, and also on furniture.
NATURAL was specifically designed to provide coverings for commercial type floors (showrooms, offices) and home floors.
Amounts required
You will need 2 kg/m² (A+B+C) to obtain a 1.1 mm thick layer.
Application
NATURAL is applied only by NORD RESINE specialized team
NATURAL is Class 1 Fire Resistant in accordance with DM 26/06/1984. Official test report
Link with "Reference" in home page to see reference projects
|
|
|
|
|
|
| NORDPOWDER CERA |
|
|
|
|
Dust resistant floor wax
NORDPOWDER CERA is a liquid preparation based on polyolefinic waxes, polymeric compounds, modifiers, additives and water. When applied to industrial floors, the product penetrates well inside and consolidates all loose particles. Its action is completed by the formation of a thin, clear surface film making all cleaning operations easier.
Thanks to NORDPOWDER CERA's distinctive features dirt does not stick to it and can easily be removed.
Apply NORDPOWDER CERA with the proper wax dispenser, in two layers, leaving a few hours in between, and make sure the two layers are laid one across the other.
Average amount required: 0.050(0.075 litres/m²
|
|
|
|
|
|
| NORDPUR ESTERNI |
|
|
|
|
Polyurethane coating for outdoor florring
NORDPUR ESTERNI is a two components product which produces a flexible and highly adhering material. When applied to various surfaces, this provides a smooth covering with weather and abrasion resistance properties.
The product is available in three standard colours, white, red and grey (other colours available on request) that do not significantly alter in time.
Range of use
NORDPUR ESTERNI is used as a protective layer for outdoor surfaces, especially concrete.
It can also be used on metal surfaces and ceramic tiles. The product is particularly indicated for stadium terraces.
How to apply the product
Add component B to component A and mix mechanically.
Apply two layers at 6(24 hours interval using a short pile roller.
Amount required: 0.3 kg/m²
|
|
|
|
|
|
| NORDPUR ESTERNI ADS |
|
 |
|
PACKAGING
9,15 kg (A + B + C) |
|
|
|
|
No slip polyurethane coating
NORDPUR ESTERNI ADS is a three component version of NORDPUR ESTERNI and offer a no slip finishing.
Adding the third component (part C) to the mix of NORDPUR ESTERNI (part A and part B), the obtained no slip film is useful in case of wet flooring or in case of flour presence on the flooring.
|
|
|
|
|
|
| NORDPUR ESTERNI EXTRAGRIP |
|
|
|
|
No slip polyurethane coating
Once mixed together, the two components produce a flexible and highly adhering material. When applied to various surfaces, this provides an anti-slip coating with considerable abrasion resistance properties.
The product is available in the clear version and in three standard colours, white, red and grey (other colours available on request) that do not significantly alter in time.
Range of use
NORDPUR ESTERNI EXTRAGRIP is used as a protective layer for outdoor surfaces, especially concrete.
It can also be used on metal surfaces and ceramic tiles, as well as various types of resin floors.
|
|
|
|
|
|
| NORDPUR INTERNI |
|
|
|
|
Smooth polyurethane coating for interiors
NORDPUR INTERNI is a bicomponent product that, once mixed and applied, produces a highly adhering material. NORDPUR INTERNI can easily be applied to different types of substrates to obtain even thin layers of a smooth coating impermeable to oil and grease and offering high abrasion resistance.
The product is available in three standard colours (red, grey and green) and is not suitable for outdoor use. Other colours are available on request, but the product has a tendency to yellow and we recommend only deep, dark colours.
Range of use
NORDPUR INTERNI is used as a coloured coating protecting from dust and grease a variety of concrete floors (hardened concrete) found in industrial warehouses, garages, etc.
It can also be used as a protective barrier against water vapour on concrete supports destined to be overlayed with wood.
Application
After drying the surface:
* pour component A into component B and mix well using a drill with the proper attachment;
* dilute with about 30% NORDPUR SOLVENT and proceed to apply the first layer with a roller, running it repeatedly over the surface in a criss-cross manner;
* after 6(24 hours, spread a second layer of (undiluted) product.
Amount required: 0.25 kg/m² on average.
|
|
|
|
|
|
| NORDPUR INTERNI ADS |
|
 |
|
PACKAGING
8,09 kg (A + B + C) |
|
|
|
|
No slip polyurethane coating for interiors
NORDPUR INTERNI ADS is a three component version of NORDPUR INTERNI and offer a no slip finishing.
Adding the third component (part C) to the mix of NORDPUR INTERNI (part A and part B), the obtained no slip film is useful in case of wet flooring or in case of flour presence on the flooring.
|
|
|
|
|
|
| NORDPUR SW |
|
 |
|
PACKAGING
6,2 kg or 18,6 kg (A + B) |
|
|
|
|
Water based polyurethane coating for flooring
NORDPUR SW is a water based product that, once mixed, produces a flexible and highly adhering material. It can easily be applied to different types of substrates to obtain a smooth coating with good weather and abrasion resistance properties. Its colour will not significantly change in time.
Range of use
NORDPUR SW is indicated as a finish and protection coating in the following cases:
- with waterproofing systems involving the use of BETONGUAINA or BETONGUAINA.S;
- epoxy resin, epoxy cement or polyurethane resin coatings on floors and walls;
- concrete floors or concrete footings not used as parking areas for cars or vans.
Application
Add NORDPUR SW component B to component A, mix carefully, then dilute with 10(20% water (in weight), keeping in mind that high dilutions will reduce the product covering capacity.
Apply, with a short pile roller or spray, one layer or else two layers at 6-8 hours interval
Amount required
The average amount of product required per layer (if you are using a roller) is 0.15(0.17 kg/m²
|
|
|
|
|
|
| NORPHEN 200 |
|
|
|
|
Solvent free epoxy floor coating
NORPHEN 200 is a two components product used to coat concrete floors. Once cured, the material has excellent hardness and abrasion resistance qualities, despite being quite flexible. It also offers good general chemical resistance.
NORPHEN 200 forms an impermeable film, rather shiny, easy to clean, particularly suitable for interiors with special hygiene and easy cleaning requirements. Available in a number of colours.
NORPHEN 200 is Class 1 Fire Resistant in accordance with DM 26/06/1984 and DM 03/09/2001. Official test report
Range of use
NORPHEN 200 is used as:
* a finish coating for STRATOFLEX systems;
* a surface coating on its own, from 200( to 400( thick, for concrete floors duly treated with acid washing or thorough sanding, with the possible addition of quartz filler or corundum for greater abrasion resistance or greater grip power (anti-slip);
* coloured floor coating with added look enhancers like FLAKES, glitter particles, etc., finished with clear NORDPUR ESTERNI.
Application
Pour NORPHEN 200 component B into component A and mix well using a drill with an electrical mixer; apply with a 40cm steel float or a 25cm short pile solvent roller, according to intended use.
Amount required
To obtain a 1 mm thick coating you need to apply 1.35 kg/m² product (A+B).
|
|
|
|
|
|
| NORPHEN 200 HCR |
|
|
|
|
Solvent free epoxy floor coating
NORPHEN 200 HCR has the same field of use of NORPHEN 200 and offer higher performances in terms of chemical, mechanical and yellowing resistance.
NORPHEN 200 HCR is suitable in food and drug industry in accordance with DM 21/03/1973. Official test report
|
|
|
|
|
|
| NORPHEN 200 HCR AUTOESTINGUENTE |
|
|
|
|
Solvent free epoxy floor coating, self-extinguishing and fuel resistant
NORPHEN 200 HCR AUTOESTINGUENTE is a liquid resin compound specifically designed for surface coatings. The product, once fully cured, offers excellent overall chemical resistance and good reactivity at low temperatures (down to +5°C).
Available in the standard colours OXIDE RED and GRAY (RAL 7040).
The product is self-extinguishing (flame reaction class 1), as from certification No TV2009B41C100003 issued by the Italian Home Office. Official test report
Range of use
NORPHEN 200 HCR AUTOESTINGUENTE is used to produce a 200( thick film on floors and walls of interiors (especially boiler rooms) requiring a dust resistant coating, impermeable to oils and fuel.
Application
Pour NORPHEN 200 HCR AUTOESTINGUENTE component B into component A and mix carefully using a drill with proper attachment for at least 20-30 seconds, in order to obtain a homogeneous mixture. Apply, with a short pile roller, one layer or else two layers depending on the substrate absorption.
Amount of product required
Average amount required per layer (using a roller) is c. 150-250 g/m².
|
|
|
|
|
|
| NORPHEN DRESS |
|
|
|
|
Low viscosity epoxy system for Veneziana Style flooring
NORPHEN DRESS is a liquid epoxy system that, once mixing, produces a low viscosity, high reactivity material and that, once cured, offers excellent flexibility and good compression resistance.
Range of use
NORPHEN DRESS technical features make it an ideal solution to realize fluid conglomerates with high inert material content, for use in tiles manufacturing or in situ floor laying followed by final honing. A typical example, in this regard, is the Venetian style floor, featuring marble and other stones chips mixed up with epoxy resin.
Application
Pour component B into component A and mix well with a professional mixer; add the desired inert material and carry on mixing using the proper equipment.
Apply with a trowel and compact as you go along; after 1 or 2 days setting (at 20(25°C) proceed with honing and polishing.
Amount of product required
From 4,0 to 6,0 kg/ m² depending on aggregate size.
|
|
|
|
|
|
| NORPHEN ESC |
|
 |
|
PACKAGING
FONDO
12 or 20 kg (A+B)
FINITURA
5,6 or 12,6 kg (A+B) |
|
|
|
|
Finish coating for static dissipative/conductive floorings
NORPHEN ESC is a finish coating for the resin floor system made up of NORPHEN ESC FONDO and NORPHEN ESC, designed to obtain static dissipative floors (vertical electrical resistance not exceeding 109Ohm), or conductive floors (vertical electrical resistance not exceeding 106Ohm), in compliance with EN 14041:2004 regulations.
Electric resistance measurements for the NORPHEN ESC FONDO and NORPHEN ESC system were taken by the CERT Laboratory of Treviso Tecnologia, in line with UNI EN 1081 regulations (test reports No. 240/04 and 241/04).
Range of use
NORPHEN ESC is used as a high performance finish targeted at flooring systems with special requirements for staff and equipment safety, such as in EPAs (electrostatic protected areas), e.g.:
* electronics industry;
* operating theatres;
* interiors subject to high explosion risk;
* assembly systems and automated warehouses;
* computer and data processing centres.
|
|
|
|
|
|
| NORPHEN FONDO SL |
|
 |
|
PACKAGING
3 o 12 kg A + B |
|
|
|
|
Two components solvent free epoxy primer
NORPHEN FONDO SL is a two components solvent free epoxy primer that, once mixed, is very fluid, clear and self-levelling; it can be used to create an anchoring base for any subsequent finishing layer.
NORPHEN FONDO SL is designed to harden in about 6 hours, to allow two working cycles a day and thus reduce considerably the time required to lay a resin floor.
In the 48 hours following application it will make the surface ready to anchor any subsequent layer of epoxy resins or other compatible ones.
Range of use
NORPHEN FONDO SL is used as:
* a primer on dry concrete, asbestos-cement and wood;
* a basic smoothing treatment with or without added quartz, with or without light quartz dusting, to prepare surfaces for self-levelling epoxy layers.
Application
Pour NORPHEN FONDO SL component B into NORPHEN FONDO SL component A and mix thoroughly with a professional mixer.
On a surface that must be strictly dry deep down, apply NORPHEN FONDO SL with a smooth steel spatula (or alternatively with a roller or flat brush), adding 0.1-0.3 mm quartz sands (c. 30% in weight with respect to A+B); you can then dust lightly (if required) with 0.1-0.5 mm quartz sands.
Amount of product required
* 0.2 kg/m² for roller application;
* 0.45 kg/m² approx. for a smoothened or acid washed surface;
* 1.0 kg/m² approx. for a surface subjected to medium shot blasting.
|
|
|
|
|
|
| NORPHEN LEVEL |
|
|
|
|
Self-levelling epoxy coating
NORPHEN LEVEL is a two component product that, once the ingredients are mixed, can easily be applied using the self-levelling coating technique.
When fully cured, the material forms a smooth coating, impermeable to water and oil, hard and flexible, especially suitable to coat industrial concrete floors wherever there is a requirement for a dust resistant, heavy duty surface that can easily be disinfected.
Range of use
NORPHEN LEVEL is used to make low-medium thickness (1 to 4 mm) coatings, both as a single layer or using the technique of multiple layers with quartz sand dusting on a wet surface, to grant anti-slip properties to floors normally used in the following sectors:
* meat, fruit and vegetables processing companies, slaughterhouses, dairies, fishmongers, bakers, patisserie shops, etc.;
* kitchens and canteens in hospitals, restaurants and hotels;
* cold stores, etc.
Application
Pour NORPHEN LEVEL component B into component A and mix well with a slow speed mechanical mixer to obtain a homogeneous mixture.
* pour NORPHEN LEVEL onto the surface, previously primered, and spread with a smooth steel spatula or a suitable toothed spatula, according to the amount of product you plan to use (see "Yield");
* although not strictly required, you may also use a bubble bursting roller.
* If requested, spread on the wet surface with selected quartz sand;
Yield
To obtain a 1 mm thick coating you will need 1.07 kg/m² plain product (A+B).
|
|
|
|
|
|
| NORPHEN MALTA BASE |
|
|
|
|
Epoxy mortar - Clear or grey colour
NORPHEN MALTA BASE is a two component epoxy resin, specifically designed to be additioned with variable amounts of quartz sands (different particle size) to obtain exceptional resin-quartz mixes. These may be used to produce special mortars offering superior mechanical and chemical properties with respect to cement based ones. It is available clear or grey colour.
Range of use
NORPHEN MALTA BASE is used as a mortar binder in the following applications:
* building gradients made up of layers from 1mm thick upwards, prior to resin coating, in particular for the food processing industry;
* repairing holes and depressions on industrial quartz concrete floors;
* making joinings and props on bridges and viaducts;
* making floor-to-wall borders before laying down resin floors.
Application
Pour NORPHEN MALTA BASE component B into component A and mix well with a slow speed mechanical mixer to obtain a homogeneous mixture. Add the mix of quarz sands and proceed in accordance with the instructions of technical data sheet.
Amount of product required
The amounts (weight of resin+quartz sand) needed are approximately from 1,6 to 2,0 kg/m² per 1 mm thickness.
|
|
|
|
|
|
| NORPHEN SW SMALTO |
|
|
|
|
Water based epoxy flooring
NORPHEN SW SMALTO is a water based two component product that creates a film impermeable to water and oil, but permeable to water vapour, offering excellent adhesion to underlying surfaces and good overall chemical resistance. It can be applied on substrate with humidity content more than 3%.
Test report No. 173969/e issued by EMPA (Zurich) (Federal Laboratory for Materials Testing and Research), attests the product suitability for tunnel walls lining in the roadwork sector. Official test report.
Range of use
NORPHEN SW SMALTO is mainly used to coat quartz finished industrial concrete floors: in particular, it is highly indicated for stain and dust protection purposes in warehouses, depots, garages, etc.
Application
Pour NORPHEN SW SMALTO component A into component B and mix well using a drill with proper attachment.
You can apply with a roller, brush or sprayer and adjust viscosity, if necessary, by adding water up to max 10(15% by weight.
Amount of product required
From 0,25 to 0,30 kg/m² product (A+B), according to surface absorption.
|
|
|
|
|
|
| NORPHEN SW SOLID |
|
|
|
|
Dustproof, oilproof, consolidating two component aqueous emulsion
NORPHEN SW SOLID is a two component product that offers considerable penetrating capacity even on wet surfaces; once cured, it delivers a dustproof and oilproof film with exceptional consolidating properties.
NORPHEN SW SOLID does not alter chemical properties/drinkability of the water it comes in contact with the cured product (in accordance with DPR 236/88). Official test report.
Range of use
NORPHEN SW SOLID is used to provide:
* dustproof and oilproof glossy finish on quartz hardened concrete floors (with or without iron oxide colouring) after they have been left to set for at least 10 days;
* waterproof protective lining on tanks designed to contain water, even drinkable water, provided a washing cycle is carried out, before use, 7 days after product application (in normal conditions);
* consolidating treatments for non cohesive plasters or mortars.
Application
Pour component B into component A and mix with a professional mixer to completely emulsify component B; dilute with from 1 to 3 parts of water per 1 kg of NORPHEN SW SOLID (A+B) in accordance with technical data sheet.
Yield
With 1 kg product, duly diluted, you can treat 40 m² surface area
|
|
|
|
|
|
| Q-FONDO ESC |
|
|
|
|
Water based conductive epoxide base
Q-FONDO ESC a water based product made of two components. Q-FONDO ESC forms a waterproof opaque film also resistant to oils but permeable to water vapour. It has an excellent adhesion to substrates in cls even if wet or with curing limited to the first 12-24 hours.
Furthermore it has a good overall resistance to chemicals.
Q- FONDO ESC is available only in black.
Range of use
Q-FONDO ESC linked with Q-LEVEL ESC can be used in the creation of dissipative (vertical electric resistance not more than 109 Ohm) or conductive (vertical electric resistance not more than 106 Ohm) static floors which respect the requirements of the EN 14041:2004 regulations.
The essential distinctiveness of the product is that it can be applied even to structures already wet or cast for at least 12-24 hours while the adhesion is not compromised.
|
|
|
|
|
|
| Q-LEVEL |
|
 |
|
PACKAGING
11 kg (A+B):
Comp.A kg 1,0
Comp.B kg 10,0 |
|
|
|
|
Self-levelling opaque epoxy-based
coating for flooring
Q-LEVEL is a double component water based product. Once applied the product forms a rather hard layer, water and oil proof, though permeable to water vapor and particularly appropriate for the creation of mono or polychrome self-levelling coatings.
Q-LEVEL possesses excellent adhesion and good overall chemical resistance. The product is available in a wide range of colors upon request.
Range of use
Q-LEVEL finds its use as a colored self-levelling coating for the creation of flooring in the following sectors:
- in show-rooms and stores of any kind;
- in private homes;
- in offices (under the condition, in this case, of consulting first Nord Resine’s technical service);
- resin coating for various kinds of industrial flooring.
Usable substrates
- mixes in sand and cement or cement based pre-packed and self-levelling;
- natural stone floorings;
- tile floorings of any kind;
- newly cast concrete;
- new concrete already matured;
- old concrete;
- wooden panels;
- cls and mixes on radiant floorings;
- resinous coatings.
|
|
|
|
|
|
| Q-PRIMER |
|
|
|
|
Two component primer and consolidator
in water based emulsion
Q-PRIMER is a two component product composed of:
- mix of pre-polymer epoxide liquids, additives and emulsifiers;
- amine of co.polymerisation, additives and emulgents.
The product has a very high penetration capacity even on wet or freshly cast substrates and, after polymerisation, creates an exceptional consolidation of the cement base. It is, therefore, an excellent starting point for various application cycles.
Q-PRIMER can be used as:
1. a consolidator and primerf or the treatment of:
- new or old concrete;
- plasters, even lime based;
- mortar without cohesion;
- screeds of sand and cement or of calcium sulphate;
- wooden panels.
2. an anti-evaporator and pore-filler for the treatment of:
- new concrete (or old) cast even only 12-24 hours previously
- in both the above cases the various finishers of the Q series should be applied on top of Q-PRIMER from the day after.
Advantages
- possesses elevated primer and consolidation properties;
- does not contain solvents and thus respects the environment and the operator;
- forms a film permeable to vapour;
- applicable to damp surfaces with temperatures as low as +5°C.
|
|
|
|
|
|
| Q-RASANTE |
|
 |
|
PACKAGING
3,6 or 18 kg (A+B+C) |
|
|
|
|
Rapid hardening
epoxide mortar for levelling
Q-RASANTE is a water based three component product. After application and hardening the product forms a very hard, slightly rough layer especially designed for smoothing horizontal surfaces to be successively finished with resin. It has an excellent adhesion to the substrate and a high pressure resistance factor.
Q-RASANTE is designed for use on humid screeds and cement floors. It can also be used between 8-24 hours after a cast even at temperatures of only +5°C.
Q-RASANTE can be used as a base layer for the successive coverings in the following sectors:
- in showrooms and shops of any kind;
- in private houses;
- in offices (in this case technical services at Nord Resine must be consulted beforehand);
- resin coverings for industrial floors of various types.
Substrates usable:
- newly cast concrete;
- new concrete already set;
- old concrete;
- sand and cement or ready-made screeds and cement based self-levellers;
- cls and screeds on heat radiant floors;
- wooden panels;
- natural stone floors;
- floors paved in tiles of any type;
- resin coverings
Q-RASANTE, in the coloured version becomes a finishing covering for certain categories in the industrial sector.
|
|
|
|
|
|
| Q-SMALTO / Q-SMALTO LC |
|
 |
|
PACKAGING
Q-SMALTO: 9,0 kg (A+B)
Q-SMALTO LC: 10,25 kg (A+B) |
|
|
|
|
Water based coloured epoxide
two component covering
Q-SMALTO a water based product made of two components. After drying Q-SMALTO forms an opaque film which is impermeable to water and oils but not to water vapour. It has an excellent adhesion to concrete substrates even if wet or cast only 12-24 hours previously; and is also resistant to chemicals.
Q-SMALTO is available in standard grey (RAL 7040) but can be ordered in many other colours.
Range of use
Q-SMALTO is used ideally as a protective, coloured, anti-dust, anti-oil and anti-evaporation material for industrial floors finished with quartz, to be applied within 24 hours after the cast, for
- garages;
- food warehouses;
- deposits of all types;
- light industry etc.
Q-SMALTO LC can be used to make tanks in cls impermeable for the treatment of sewage and white water (drainage canals).
The essential distinctiveness of the product is that it can be applied even to structures already wet or cast for at least 12-24 hours while the adhesion is not compromised.
|
|
|
|
|
|
| STRATOFLEX |
|
|
|
|
Multilayered self-levelling covering for
industrial floors
STRATOFLEX is a two component self-levelling product. When it is completely cured the material is very hard and flexible, resistant to mechanical and thermal stress and is specifically designed as a floor covering.
Range of use
- as a self-levelling floor covering STRATOFLEX can be used to create 1 to 2 mm thick floors on surfaces used by medium weight trolleys subject to frequent washes, where an anti-slip covering is not necessary, like food or light industry warehouses, paper works, printers etc.;
- as a multilayered floor covering it is suitable for creating floors with various levels of grip depending on the type of quartz sand used, adaptable for many types of industrial activities e.g. kitchens, restaurants, meat and other food production like cheese, fruit, vegetables, bread, oil, jams etc. and also areas like detergents, textiles, beer, laundries etc
- in order to obtain extra chemical resistance it can be reinforced by using NORPHEN 200 HCR or NORPHEN ESTER VE.
Substrates usable
- newly cast concrete;
- old concrete;
- sand and cement or ready-made screeds and cement based self-levellers;
- cls and screeds on heat radiant floors;
- sheets of anti-slip alluminium
- wooden panels;
- natural stone floors*;
- floors paved in tiles of any type*;
- resin coverings*
*on condition that a specialist checks its capacity to breaking and pressure resistance depending on the intended use.
|
|
|
|
|
|
| STRATOFLEX PU |
|
 |
|
PACKAGING
12 or 20 kg (A + B) |
|
|
|
|
Flexible epoxy flooring
STRATOFLEX PU is a two component product that, once fully cured, offers remarkable hardness and flexibility, as well as high mechanical and thermal resistance, especially useful for flooring in low temperature condition.
Range of use
STRATOFLEX PU can be applied as a base layer (finished with NORPHEN 200, NORPHEN 200 HCR or STRATOFLEX SUPER) in the preparation of 1 to 7mm thick floor coverings designed to withstand medium duty wheeled traffic, as well as frequent washing. That applies to the food processing industry, the light engineering industry, paper and textile industry, dye-works, printing works, kitchens and canteens.
Application
Pour component B into component A and mix well with a professional mixer.
Proceed to level and smooth over with a float using STRATOFLEX PU additioned with 0.1(0.3 mm quartz sand;
Apply a self levelling layer of STRATOFLEX PU with added 0.3-0.8 mm quartz sand.
Spread quartz sand lightly and, the day after remove any excess of sand.
Finish off with NORPHEN 200 HCR.
Amount of product required
From 0,75 to 0,9 kg/m² depending on the size of quartz sand.
|
|
|
|
|
